Polycom EX Guía Del Usuario

The call status can be displayed in a number of ways. The display 
call status command shows table of current calls.

To display real-time status on individual B channels 
(incoming/outgoing calls), either register the terminal session with 
the listen command or start an outbound call with the dial 
command. These two commands will cause the system to re-direct 
the B channel status messages to the session which has issued one 
of these two commands. For example, if the RS-232 device issues 
a dial

 

or listen command, then call status is directed to the RS-232 

port; if a later session on a Telnet port issues a dial or listen 
command, then call status is also directed to that Telnet port.

Following is an output example for B channel status messages, 
where: 

cs 

indicates call status for one B channel. 

RINGING 

indicates a ring-in or ring-out and is equivalent 
to a 25% blue sphere on the graphical user 
interface. 

CONNECTED is 

equivalent 

to a 50% yellow sphere. 

BONDING 

indicates the bonding protocol is operational on 
the channel and is equivalent to a 75% orange 
sphere. 

COMPLETE 

is equivalent to a 100% green sphere.

->dial man 384 5551212 ISDN

Dialing manual

Dialing 5551212 384 none ISDN

cs: call[0] chan[0] dialstr[95551212] state[RINGING]

cs: call[0] chan[0] dialstr[95551212] state[CONNECTED]