Polycom EX Guía Del Usuario
ViewStation EX, ViewStation FX, and VS4000 API Guide
204
www.polycom.com
v35dialingprotocol <rs366|get>
Description
This command selects the V.35/RS-449/RS-530/RS-366 dialing
protocol. Selecting a dialing protocol is not needed if you are using
your DCE to dial the call or if you have a dedicated connection to the
far site.
protocol. Selecting a dialing protocol is not needed if you are using
your DCE to dial the call or if you have a dedicated connection to the
far site.
rs366
Enables RS-366 as the dialing protocol. At this time,
RS-366 is the only supported dialing protocol on the
system.
RS-366 is the only supported dialing protocol on the
system.
get
Displays the current setting.
Example
v35dialingprotocol rs366
User Interface Screen Location
System Info>Admin Setup>Video Network>Video Network: Dialing
Protocol
Protocol
This screen is only accessible if you have a V.35/RS-449/RS-530/
RS-366 network interface connected to your system.
v35num <set|get> <1b1|1b2> ["v35 number"]
v35num set <1b1|1b2> ["v35 number"]
v35num set <1b1|1b2>
v35num get <1b1|1b2>
v35num set <1b1|1b2> ["v35 number"]
v35num set <1b1|1b2>
v35num get <1b1|1b2>
Description
This command sets the ISDN video numbers assigned to the
system. The 1b1 and 1b2 parameters follow the convention and
system. The 1b1 and 1b2 parameters follow the convention and
v35dialingprotocol
v35num