Polycom EX Guía Del Usuario

Note  This command cannot be accessed through the RS-232 

port.

Sets the password used for remote management of the 
system if followed by the password parameter. If you 
want to erase the current setting, omit the password 
parameter. The system must have an admin password 
set before this command works. 

Displays the current admin password.

password Valid characters are: a through z (lower and 

uppercase), -, _, @, /, ;, ,, ., \, 0 through 9. The length is 
limited to 10 characters.

Note  Use quotation marks around a compound name or strings 

containing spaces (Ex: “united states” or “111 222 333”).

adminpassword set MyFXpsswd

adminpassword set 

“

EX 2003

“

System Info>Admin Setup>Security: Admin Password

advnetstats [{0..2}]
advnetstats

This command is used to get advanced network statistics for each 
call. 

Range of selectable calls in a multipoint call (maximum 
number of concurrent calls=3, where 0 is call #1, 1 is 
call #2, and 2 is call #3). Select a number from this 
range to specify a remote site call for which you want to 
obtain advanced network statistics.