Polycom EX Guía Del Usuario
ViewStation EX, ViewStation FX, and VS4000 API Guide
© Polycom, Inc. 2003
33
near move left Near camera direction change (start moving left).
near move rightNear camera direction change (start moving right).
near move up Near camera direction change (start moving up).
near move downNear camera direction change (start moving
down)
near move stop Near camera direction change stops.
near move continuous
Switches near camera move mode to continuous
mode. Camera will move in direction specified until
a camera near move stop command is sent.
mode. Camera will move in direction specified until
a camera near move stop command is sent.
near move discrete
Switches near camera move mode to discrete
mode. Camera will move a small, discrete amount
in the direction specified and then stop. No
“camera near move stop” command is required.
mode. Camera will move a small, discrete amount
in the direction specified and then stop. No
“camera near move stop” command is required.
near stop
Stops the near camera movement when in
continuous mode.
continuous mode.
near <setposition|getposition> <x> <y> <z>
Sets or gets the x, y, and z coordinates of the
currently selected ptz camera.
Camera ptz range:
-880 <= x <= 880 (pan)
-300 <= y <= 300 (tilt)
0 <= z <= 1023 (zoom)
currently selected ptz camera.
Camera ptz range:
-880 <= x <= 880 (pan)
-300 <= y <= 300 (tilt)
0 <= z <= 1023 (zoom)
Note Some D30 cameras might not be able to
reach the designed range limit. For example,
although the pan limit is 880, the camera might
only be able to reach 860.
reach the designed range limit. For example,
although the pan limit is 880, the camera might
only be able to reach 860.
near tracking on Turns on the near camera tracking mode.
near tracking off Turns off the near camera tracking mode.
near tracking to_presets
Turns on the near camera tracking to presets.
near tracking get Gets the near camera tracking mode.