Polycom vsx7000 Manual De Referencia

Integrator’s Reference Manual for the VSX Series

4 - 42

camera far 2

causes the remote terminal to begin sending its camera 2.

camera far move left

causes the far camera to start panning to the left.

camera near move zoom+

causes the near camera to zoom in.

camera registered

camera unregistered

camera near 2

camera far 1

camera near source 2

tracking

Sets the tracking mode. Returns the current near or far 
camera tracking mode when followed by the get 
parameter.

on

Turns on the near or far camera tracking mode. The 
far-site system must have the option Far Control of 
Near Camera enabled and auto-tracking turned on.

off

Turns off the near or far camera tracking mode.

to_presets

Turns on the near or far camera tracking to presets.

getposition

Gets the pan, tilt, and zoom coordinates of the currently 
selected PTZ camera in the format of pan tilt zoom.

setposition “x” “y” 
“z”

Sets the pan (x), tilt (y), and zoom (z) coordinates of 
the currently selected PTZ camera. Camera PTZ 
range: 
-880 

<=

 pan <= 880

-300 <= tilt <= 300
0 <= zoom <= 1023
Note: Some D30 cameras might not be able to reach 
the designed range limit. For example, although the 
pan limit is 880, the camera might only be able to reach 
860.

register

Registers to receive feedback when the user changes 
the camera source. Returns the current camera 
registration state when followed by the get parameter.

unregister

Unregisters to receive feedback when the user 
changes the camera source.