Polycom vsx7000 Manual De Referencia

Integrator’s Reference Manual for the VSX Series

4 - 58

Sets or gets the CTS serial interface control signal (clear to send) configuration. 

This command is only applicable if you have a V.35 network interface 

connected to your system.

cts <get|normal|inverted|ignore>

cts normal

cts inverted

The default setting for this signal is 

“normal”

.

User interface screen location: System > Admin Settings > Network > IP > 

H.323 Settings> V.35/RS-449/RS-530 (page 3): CTS 

get

Returns the current setting.

normal

Sets the signal to normal (high voltage is logic 1).

inverted

Sets the signal to inverted (low voltage is logic 1).

ignore

Ignores the signal.