Polycom vsx7000 Manual De Referencia
System Commands
4 - 205
prilinesignal
Sets or gets the PRI line signal.
Syntax
prilinesignal get
prilinesignal set <esf/b8zs|crc4/hdb3|hdb3>
prilinesignal set <esf/b8zs|crc4/hdb3|hdb3>
Feedback Examples
prilinesignal set esf/b8zs
returns
prilinesignal esf/b8zs
Comments
User interface screen location: System > Admin Settings > Network > ISDN
(page 2): Line Signaling
This screen is only accessible if you have a PRI network interface connected to
This screen is only accessible if you have a PRI network interface connected to
your system.
Parameter
Description
get
Returns the current PRI line signal setting.
set
Sets the PRI line signal. It requires one of the following
parameters: esf/b8zs, crc4/hdb3, hdb3
parameters: esf/b8zs, crc4/hdb3, hdb3
esf/b8zs
A method of signal encoding used with a T1 interface.
This is the only choice for T1. This value actually
chooses both a framing format and an encoding
method. Legacy frame formats, such as D4, are not
supported. In addition, older encoding methods, such
as B7ZS, are not supported.
This is the only choice for T1. This value actually
chooses both a framing format and an encoding
method. Legacy frame formats, such as D4, are not
supported. In addition, older encoding methods, such
as B7ZS, are not supported.
crc4/hdb3
A method of signal encoding used with an E1 interface.
This is the default value. Data is encoded using HDB3
to ensure proper one-density, and CRC4 error
checking is enabled on both transmit and receive.
This is the default value. Data is encoded using HDB3
to ensure proper one-density, and CRC4 error
checking is enabled on both transmit and receive.
hdb3
A method of signal encoding used with an E1 interface.
CRC4 error checking is disabled.
CRC4 error checking is disabled.