Polycom vsx7000 Manual De Referencia

E - 1

Status Messages

The call status can be displayed in a number of ways. The 

command on page 4-113 returns a table listing the status, speed, and dialed 

number of current calls. 
To display real-time status on individual B channels (incoming or outgoing 

calls), either register the API session with the 

page 4-39, or start an outbound call with the 

These two commands will cause the system to re-direct the B channel status 

messages to the session which has issued one of these two commands. For 

example, if the RS-232 device issues a dial or listen command, then call 

status is directed to the RS-232 port; if a later session on a Telnet port issues a 
dial or listen command, then call status is also directed to that Telnet port.

The following output example is for B channel status messages, where: 

cs

Indicates call status for one B channel.

RINGING

Indicates a ring-in or ring-out and is equivalent to a 25% blue 
sphere on the graphical user interface. 

CONNECTED

Is equivalent to a 50% yellow sphere. 

BONDING

Indicates the bonding protocol is operational on the channel and 
is equivalent to a 75% orange sphere.

COMPLETE

Is equivalent to a 100% green sphere.