Polycom vsx7000 Manual De Referencia
Integrator’s Reference Manual for the VSX Series
2 - 18
PowerCam/VISCA Control Cable (VSX 7000e or VSX 8000)
This cable connects a VSX 7000e or VSX 8000 to Non-Polycom camera using a
VISCA 8-pin DIN connector, or to a Polycom PowerCam break-out cable with
a PowerCam camera.
The 8-pin mini-DIN to DB-15 cable is not qualified and should not be used. As
stated below, this information is provided for your reference only and
Polycom claims no responsibility or liability for the use of this information.
Instead, Polycom recommends the 8-pin mini-DIN to DB-9 on this page and
the DB-15 to DB-9 adapter on
, which is included with the VSX 8000
system.
8-pin mini-DIN to DB-15
Description
Used With
Part Number
Length
Other Cables
Available
Available
8-pin mini-DIN to DB-15
VSX 7000e or
VSX 8000 main
camera input
VSX 8000 main
camera input
1457-50527-001
Shipped Length:
50 ft (15 m)
50 ft (15 m)
1457-50527-100
100 ft (30 m)
100 ft (30 m)
8-pin mini-DIN to DB-9
VSX 7000e or
VSX 8000
secondary
camera input on
serial port
VSX 8000
secondary
camera input on
serial port
2457-10029-001
(RTS/CTS not
supported on this
cable)
(RTS/CTS not
supported on this
cable)
Shipped Length:
50 ft (15 m)
50 ft (15 m)
2457-21259-001
100 ft (30 m)
100 ft (30 m)
Drawings and part numbers are provided for reference only. Polycom claims no responsibility
or liability for the quality, performance, or reliability of cables based on these reference
drawings, other than cables provided by Polycom. Contact your Polycom distributor or
Polycom Custom/Vertical Products to order cables that meet the appropriate manufacturing
tolerances, quality, and performance parameters for your application.
or liability for the quality, performance, or reliability of cables based on these reference
drawings, other than cables provided by Polycom. Contact your Polycom distributor or
Polycom Custom/Vertical Products to order cables that meet the appropriate manufacturing
tolerances, quality, and performance parameters for your application.
P1 15 Pin D Connector
P2 VISCA 8 Pin mini Din
Pin #
Signal Name
Pin #
Signal Name
1-6, 9-11, 13
NC
1, 2, 8
NC
7 SW-RX/SN-TX
3
SW-RX/SN-TX
8 IR-SIGNAL
7
IR
OUT
12 P
GND
4 GND
14 SW-TX/SN-RX
5 SW-TX/SN-RX
15 IR
RETURN
6 GND
SHIELD
SHIELD
15 Pin D-sub
Male
P1
50' ± 3.0"
P2
1
5
7
6
4
2
3
8
15
14
12
10
9
11
1
3
8 Pin Mini Din
Male
1
2
5
4
3
6
7
8