Polycom vsx7000 Guía De Referencia

Administrator’s Guide for the VSX Series

4 - 16

Configure the content display for a set-top or component VSX system after 

connecting a Visual Concert VSX or ImageShare II unit as described in the 

section 

 on page 

.

Go to System > Admin Settings > Monitors > Graphics VGA.

Configure these settings:

Select 

 if you need to adjust the VGA Input settings for systems that 

have built-in VGA capture capability or that use a Visual Concert VSX for 

VGA capture. 

Select Horizontal Position, Vertical Position, or Phase. 

Press the navigation buttons on the remote control to adjust the 

setting. 

Press 

 Back on the remote control to accept the setting. 

Go to System > Admin Settings > Monitors > Monitors.

Indicates that the screen appears black when there is no 
content to display.

Specifies the VGA resolution for your monitor.
Select the maximum VGA resolution that your monitor or 
projector can support. Consult the user manual provided with 
the VGA monitor or projector for performance information.

Specifies the bandwidth split for People and Content video.
•

—

50% Content, 50% People

—

90% Content, 10% People

—

10% Content, 90% People

Notes: In a multipoint call, the MCU setting determines the 
People and Content video rates, not the system sending the 
content. 
This setting does not apply if automatic bandwidth adjustment 
is enabled using the API.

Specifies whether to send content automatically when the 
computer is connected to the Visual Concert VSX or 
ImageShare II.
If this option is not selected, the presenter must press the 
Play button on the Visual Concert VSX or ImageShare II to 
send content to the far sites.