Polycom vsx7000 Guía De Referencia

Administrator’s Guide for the VSX Series

4 - 20

This section describes how to configure the audio behavior of a VSX system, 

including:

• General audio settings

• Settings for Polycom StereoSurround

• Settings for the Polycom Vortex mixer

• Settings for microphones connected directly to the balanced audio inputs

The Audio Settings screens let you specify the settings appropriate for the 

equipment you are using.

Go to System > Admin Settings >Audio > Audio Settings.
The Audio screen, where you choose Audio Settings or Stereo Settings, is 

not present on a VSX 3000 or VSX 3000A. It is available on a set-top or 

component system after you have enabled the Polycom StereoSurround 

option.

Configure these settings:

Sets the volume level of the ring tone and user alert tones.

Specifies the ring tone used for incoming calls.

Specifies the tone used for user alerts.

Specifies whether to mute incoming calls. 
Incoming calls are muted by default until you press the mute 
on the microphone or on the remote control.

Enable Internal 
Ringer
VSX 3000
VSX 3000A

Specifies an additional ring tone when receiving an 
incoming call. The internal ringer is built into the system and 
alerts you to incoming calls.