Polycom vsx7000 Guía De Referencia

Administrator’s Guide for the VSX Series

3 - 24

If you have a VSX 7000, VSX 7000s, VSX 7000e, or VSX 8000 system, the 

optional serial V.35/RS-449/RS-530 network interface allows you to connect 

to data communications equipment using a V.35, RS-449, or RS-530 serial 

interface. 

Go to System > Admin Settings > Network > V.35/RS-449/RS-530.

Configure these settings:

Select 

 and configure these settings:

Allows the system to connect to a terminal adapter using 
a V.35, RS-449, or RS-530 connection. 

Specifies whether one or two lines are connected.

Allows users to dial calls from this system. 
Clear this setting if this is a dedicated connection or if 
another device is used for dialing calls.

Specifies the area code and number(s) that other sites 
dial to reach this system. 
If this is a dedicated connection, leave these fields blank.

Lets you specify the dialing prefix required to reach an 
outside line.

Lets you specify what data communications equipment is 
connected to the network interface. The system 
automatically displays the default prefixes, suffixes, and 
calling speeds required by that device.
If your device is not listed, select Custom.

Lets you define the prefixes or suffixes to use for each 
speed used in a Custom Calling Profile. For information 
about required prefixes and suffixes, see the 
documentation that came with the device.
If you choose a predefined Calling Profile, this 
information is supplied for you.