Belkin f1pg111en Guía De Instalación Rápida
F1PG111EN
Belkin, Ltd.
7 Bowen Crescent • West Gosford
NSW 2250 • Australia
Tel: +61 (0) 2 4372 8600
Fax: +61 (0) 2 4372 8603
7 Bowen Crescent • West Gosford
NSW 2250 • Australia
Tel: +61 (0) 2 4372 8600
Fax: +61 (0) 2 4372 8603
Belkin, B.V.
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
Fax: +31 (0) 20 654 7349
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
Fax: +31 (0) 20 654 7349
Belkin Tech Support
US: 888-542-2207
US: 888-542-2207
Belkin Corporation
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Fax: 310.898.1111
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Fax: 310.898.1111
Belkin, Ltd.
Express Business Park • Shipton Way
Rushden • NN10 6GL • United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
Express Business Park • Shipton Way
Rushden • NN10 6GL • United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
© 2004 Belkin Corporation. All rights reserved. All trade names are registered trademarks of
respective manufacturers listed.
respective manufacturers listed.
P74264
Quick Installation
Guide
Check
7
Check
8
Start Here
3.1
Once you have completed
connecting the Message
Manager, the Wizard will
check the connection to the
Message Manager then go
on to determine what type of
Internet connection you have.
Manager, the Wizard will
check the connection to the
Message Manager then go
on to determine what type of
Internet connection you have.
3.
Check
Check the Message Manager connection
Configure
9
Configure
10
4.1
The Wizard will now transfer all
of the configuration information
to the Message Manager.
This will take approximately
one minute. During this time,
do not turn off the Message
Manager or Computer. The
Message Manager will restart
itself at the end of this step.
Please allow one minute after
restarting before continuing to
the next step to assure enough
time for boot up.
to the Message Manager.
This will take approximately
one minute. During this time,
do not turn off the Message
Manager or Computer. The
Message Manager will restart
itself at the end of this step.
Please allow one minute after
restarting before continuing to
the next step to assure enough
time for boot up.
4.
Configure
Configuring the Message Manager
4.2
The Wizard will now check for
an Internet connection. This
can take a few minutes. The
“Connected” light on the front
panel of the Message Manager
will flash during this time. Please
be patient through this process.
can take a few minutes. The
“Connected” light on the front
panel of the Message Manager
will flash during this time. Please
be patient through this process.
4.3
When the Internet connection
is complete; the Wizard will
tell you that you are finished.
The “WAN” LED on the front
of the Message Manager will
be GREEN, indicating that
the Message Manager is now
connected to the Internet.
Wait up to 5 minutes while the
Message Manager automatically
tell you that you are finished.
The “WAN” LED on the front
of the Message Manager will
be GREEN, indicating that
the Message Manager is now
connected to the Internet.
Wait up to 5 minutes while the
Message Manager automatically
registers to the Belkin callEverywhere™ center. Once a connection to our
callEverywhere center is established the phone connected to the Message
Manager will ring confirming a connection was established. Answer the
call and follow the on-phone instructions. You will be directed to go to the
following website to sign up for your service.
callEverywhere center is established the phone connected to the Message
Manager will ring confirming a connection was established. Answer the
call and follow the on-phone instructions. You will be directed to go to the
following website to sign up for your service.
www.everywhere.net
Congratulations! You have finished installing your new Message Manager.
Need Help?
For further information regarding the installation of this
product, please visit
www.everywhere.net, check your manual or call our
toll free 24/7 technical support number 888-542-2207.
Next
(click)
Next
(click)
Next
(click)
3.2
If you have a connection type
that requires a user name
and a password, the Wizard
will ask you to type in your
user name and password. If
your connection type does
not require a user name and
password, you will not see
this screen.
and a password, the Wizard
will ask you to type in your
user name and password. If
your connection type does
not require a user name and
password, you will not see
this screen.
Your user name and password
is provided to you by your
Internet Service Provider. If
you have to type in a user
name and password to
connect to the Internet, then
type that same user name and
password in here. Your user
name looks something like
“jsmith@myisp.com” or simply
“jsmith”. The service name
is optional and is very rarely
required by your ISP. If you
don’t know your service name,
leave this blank. When you
have entered your information,
click “Next” to move on.
is provided to you by your
Internet Service Provider. If
you have to type in a user
name and password to
connect to the Internet, then
type that same user name and
password in here. Your user
name looks something like
“jsmith@myisp.com” or simply
“jsmith”. The service name
is optional and is very rarely
required by your ISP. If you
don’t know your service name,
leave this blank. When you
have entered your information,
click “Next” to move on.
Message Manager
Message Manager