BlueTraks bt-211 Instruccion De Instalación

The BlueTraks BT-211 is a simple installation that can be 

performed by a professional or a do-it-yourself installer 

in a short time.  To save time and confusion, we recom-

mend advance planning for the following parts of the 

installation.

The BT-211 uses RCA connectors to supply the iPod audio-

out to the radio system.  This means the vehicle radio 

would already need to be equipped with RCA audio 

inputs which are not common in most factory radios but 

very common in most aftermarket replacement radios.  

Most new cars now feature an AUX-IN mini plug adapter 

either on the radio or located somewhere on the dash-

board.  This allows portable music players to be plugged 

in and played through the radio system.  In this case, the 

BT-211 would also use this AUX-IN connector for the audio 

input.  A special adapter may be required to use this 

AUX-IN port.

If the vehicle radio has neither RCA inputs or an AUX-IN 

input, an audio input interface device will be required.  

The vehicle radio must have either an existing separate 

CD changer located away from the radio or be pre-wired 

to add a CD changer.  

Many third-party CD changer interface devices exist that 

provide high quality sound playback.   This is because the 

CD changer interface device plugs into the CD changer 

control cable routed usually from the trunk to the dash-

board radio location.  When operating the BT-211 to 

play iPod music, the CD changer mode will need to be 

selected on the vehicle radio in order to hear sound.

The BT-211 uses a hands-free speaker to provide sound 

output for telephone calls and for the navigation sound 

playback.  The BT-211 uses a 1/8” mini plug to connect 

this hands free speaker to the unit.  

The hands free speaker does not need to be a pow-

ered speaker as the BT-211 provides amplifi cation to the 

speaker.

For some installers, it may be possible to use an existing 

speaker in the vehicle if there was a factory hands free 

system already installed.

The supplied iPod cable is designed to be routed to a lo-

cation such as the inside of the glove box or an enclosed 

area such as the center arm rest console.  Other locations 

may be more convenient as well.  Choose an area that 

the cable will stay clean and the iPod will be secure while 

the vehicle is in motion. 

© 2008 BlueTraks, Inc. All rights reserved.  Rev 1.

The BT-211 uses a microphone to provide sound input 

during hands-free telephone calls.  A specialized micro-

phone is supplied with the BT-211.  A suitable mounting 

location would be required near the driver.  An 1/8” mini 

to mini extension cable is included and may be required 

depending on the distance to the BT-211 mounting.

Some vehicles may already have a microphone built into 

the vehicle.  These are usually found near the sunroof 

controls or near the sun visors.  Using the factory installed 

microphone is suggested because of the hidden look 

and the sound quality may be superior to an aftermarket 

surface mount microphone.

Proper planning for the mounting location of the BT-211 

is important.  The unit should be located in an avail-

able space of the vehicle dashboard or lower console 

area.  Areas such as storage compartments and unused 

ashtrays for example are creative mounting locations.  

Modifi cation of these areas may be required in order to 

provide clearance for the BT-211 and rear wiring.  

BlueTraks supplies an ABS black plastic panel designed to 

be trimmed to fi t a fl at opening.  The BT-211 simply presses 

into the opening and is held in place with corner housing 

pins.  No brackets are required to support the BT-211 into 

the mounting.

Some vehicles may require a more custom mounting solu-

tion.  Openings might exist that may be a unique shape or 

a different angle is desired.  In this case, installers with ex-

perience in custom fabrication may be able to produce 

a mounting bracket using materials such as aluminum.

The BT-211 is not designed to be windshield mounted or 

on the top surface of the dashboard or held in place with 

any other type of mounting.  Use caution when choosing 

a mounting so the unit is fi xed and secured to its location.

The optional GPS-211 Navigator unit is separate from the 

BT-211 main unit.  The GPS unit may be mounted in the 

trunk, under the dashboard or in the glove box.  Choose 

a mounting location that allows easy access to the map 

SD card for navigation software updates.

Choosing a suitable mounting location for the supplied 

GPS surface mount antenna is critical.  This antenna is de-

signed to be mounted on the roof or trunk of the vehicle 

for best reception.  Sometimes mounting the antenna 

inside the vehicle such as directly behind the windshield 

can produce satisfactory results as well.

Automobile electrical noise from the vehicle’s altenator 

or starter may be heard after installing the BT-211.  In this 

case, using a 12V DC noise fi lter may solve this problem.

Read the User Guide manual carefully 

before using this system.  It contains instruc-

tions on how to use this product in a safe 

and effective manner. BlueTraks cannot be 

responsible for problems resulting from failure 

to observe the instructions in this manual. 

This manual explains how to use this product 

safely and to alert you to potential dangers 

resulting from improper connections and 

operation.

Any function that requires your prolonged 

attention should only be performed after 

coming to a complete stop. Always stop the 

vehicle in a safe location before performing 

these functions. Failure to do so may result in 

an accident.

Failure to do so may result in an accident.

Viewing the display may distract the driver 

from looking ahead of the vehicle and 

cause an accident.

Doing so may result in an accident, fi re or 

electric shock.

Use for other than its designed application 

may result in fi re, electric shock or other 

injury.

Swallowing them may result in serious injury. If 

swallowed, consult a physician immediately.

Doing so may result in personal injury or dam-

age to the product.

Doing so may cause heat to build up inside 

and may result in fi re.

Do not install the BT-211 in front of or near the 

front passenger seat air bag system.

Failure to do so may cause personal injury or 

damage to the product. Contact BlueTraks 

for repairing.

Be sure the temperature inside the vehicle is 

between +85°C (+185°F) and -10°C (+14°F) 

before turning your unit on.

If you have problems, do not attempt to 

repair the unit yourself. Contact BlueTraks for 

servicing.

Make sure the BT-211 will not be exposed to:

• Direct sun and heat 

• Excessive dust 

• High humidity 

• Excessive vibrations

• Under cold temperature conditions, the 

screen may lose contrast temporarily. After a 

short warmup period, it will return to normal. 

• Clean touch screen with dry lint-free cloth 

when dirty.  Do not use liquids to clean 

screen.