Boss Audio 606c Guía Del Usuario

9

• ON/OFF

Switch on the unit by pressing any
button (except REL button (6) and 
button (4)). When system is on, press
POWER button (1) to turn off the unit.

• FACEPLATE RELEASE

Press REL button (6) to detach the
removable faceplate.

For the unit with two bands only:
Press and hold BND/LOU button (8)
for several seconds to show the
loudness state. And shortly press it
again to turn on/off the subwoofer
output.  In CD mode or AUX mode,
press BND /LOU button (8) shortly to
show the loudness state. And shortly
press it again to turn on/off the bass
output.

Press DSP button (9) shortly to switch
display mode according to display
priority set mode.
Press and hold DSP button (9) for
several seconds until the clock is
shown on the display and flashes, then
press VOL+/- button (20)(21) to change
hours or the minutes.

Press SEL/MENU (3) shortly to change
audio mode through volume, bass,
treble, balance, and fader modes.
Press the VOL+/- button (20)(21) to
adjust the selected mode. When the
currently displayed function has not
been adjusted for several seconds, the
mode shall return to volume position
and display will return to normal radio,
CD or AUX display.

Hold press SEL/MENU (3) for several
seconds and you will enter the menu
functions then press the SEL/MENU
button to select the different modes.

Press the VOL+/- (20)(21) to select
your setting.

BEEP ON/OFF
- When the beep is on. It will beep with

every button you press.

 - When the beep is turned off. It will

not beep when you push a button.

Program power on volume level
In this mode, you can set the desired
volume level when the unit turns on.
CLOCK ON/OFF while power off
In this mode, you can select if the clock
is to be displayed while power off.
NO PRI/CLOCK/FREQ priority
- When select No Priority:

When the frequency appears on the
unit, pressing DSP button (9) will
display clock and it will not return to
frequency display until DSP button
(9) pressed again. When the clock
appears on the unit, pressing DSP
button (9) will display frequency
information.

- When select Clock Priority:

The clock will appear on the unit all
the time. Pressing DSP button (9)
while in Clock Priority will temporarily
display selected station frequency (in
RADIO mode) or track number (in CD
mode) and then returns to clock
display.

- When select Frequency Priority:

The frequency will appear on the unit
all the time. Pressing DSP button (9)
while in Frequency Priority will
temporarily display clock and then
returns to frequency display.

12hours/24hours
In this mode, you can set 24 hours
mode or 12 hours mode.  When the
currently displayed function has not
been adjusted for several seconds, it
will exit menu set mode.

In radio and AUX mode, press 

BEEP ON/OFF         Program power on volume level

12hours/24hours         CLOCK/FREQ priority

CLOCK ON/OFF while power off

Volume

Bass

Treble

Balance

Fader