Boss Audio 758dbi Guía Del Usuario
Page 1
1. VOLUME UP/DOWN KNOB (turn)& AUDIO MODE SELECTOE (push)
In normal mode, use this knob to increase or decrease the volume level.
To access the various sound parameters push the knob (like a button) to cycle
through the following adjustable settings:
To access the various sound parameters push the knob (like a button) to cycle
through the following adjustable settings:
Push and hold the knob (like a button) for more than 2 seconds to turn on
TA ON/TA OFF, then push it and repeatedly to select TA SEEK/TA ALARM,
PI SOUND/PI MUTE, RETUNE S/RETUNE L, MASK DPI/MASK ALL, BEEP ON
/BEEP OFF, USER SET(FLAT, CLASSIC, ROCK, POP), VOL LAST/ VOL DEFA,
STEREO/MONO
TA ON/TA OFF, then push it and repeatedly to select TA SEEK/TA ALARM,
PI SOUND/PI MUTE, RETUNE S/RETUNE L, MASK DPI/MASK ALL, BEEP ON
/BEEP OFF, USER SET(FLAT, CLASSIC, ROCK, POP), VOL LAST/ VOL DEFA,
STEREO/MONO
, LOUND ON/LOUND OFF,
DX/LOCAL
, CLK ON/CLK OFF, CLK 12/CLK 24 mode.
VOLUME -> BASS ->TREBLE -> BALANCE -> FADER
Use the knob to increase or decrease the settings for Volume, Bass, Treble,
Balance and Fader.
Use the knob to increase or decrease the settings for Volume, Bass, Treble,
Balance and Fader.
In each mode, the waiting time is about 5 seconds, and the time waiting time
is over, it returns to the last display mode .
The control mode of E.VOL is operated with following numeric display.
is over, it returns to the last display mode .
The control mode of E.VOL is operated with following numeric display.
- VOL: (MIN)00, 01,......46, 47(MAX).
- BASS/TRE: -07, -06,...,00,...+06,+07
- BAL: 0LR9, 1LR9, ..., 9LR9,..., 9LR1, 9LR0
- FAD: 0FR9,1FR9, ..., 9FR9,..., 9FR1, 9FR0
- BASS/TRE: -07, -06,...,00,...+06,+07
- BAL: 0LR9, 1LR9, ..., 9LR9,..., 9LR1, 9LR0
- FAD: 0FR9,1FR9, ..., 9FR9,..., 9FR1, 9FR0
(in RADIO mode)
(in RADIO mode)
Use the knob to increase or decrease the settings for these functions.
Press POWER to turn unit on. Press the button to MUTE the audio. Press and
hold POWER to turn it off.
hold POWER to turn it off.
Press this button repeatedly to cycle through the audio input sources:
BLUETOOTH > AUX >TUNER > USB > CARD > IPOD
BLUETOOTH > AUX >TUNER > USB > CARD > IPOD
2. POWER/MUTE
3. MODE (Input Select)
Please note:
iPod Mode can only be selected if an iPod is present in the dock.
iPod Mode can only be selected if an iPod is present in the dock.
General and Radio Controls
1
9
11
2
5
7
3
10 12
6
8
4
Page 10
Setting Mode
You can make changes to the system setting in the following area:
Radio Frequency Range + Enable/Disable AUX In+ Clock Format
- Radio Settings
The unit can operate on several different frequency ranges. Please see
the following for these ranges.
The unit can operate on several different frequency ranges. Please see
the following for these ranges.
- AUX Input Enable/Disable
Press DOWN ARROW to move between Enable and Disable modes.
When the selection has been made, press ENTER to save it and move to
Press DOWN ARROW to move between Enable and Disable modes.
When the selection has been made, press ENTER to save it and move to
next setting area.
- Clock Format (12-hour or 24-hour)
Press DOWN ARROW to move between
press ENTER to save it and turn off this unit.
Press DOWN ARROW to move between
press ENTER to save it and turn off this unit.
12-hour or 24-hour format,
To enter setting mode, input the following command by pressing remote
keys 8, DOWN DIRECTION KEY, 9, ENTER
keys 8, DOWN DIRECTION KEY, 9, ENTER
"
"
To change the range to suit your location, press DOWN ARROW unit
the desired frequency range is hight lighted. The press ENTER
to save it and move to next setting area.
the desired frequency range is hight lighted. The press ENTER
to save it and move to next setting area.
The display will show TEST MOD breifly to indicate you are in
system setting area and then automatically change to Radio Frequency
selection mode. At anytime, you can press the
system setting area and then automatically change to Radio Frequency
selection mode. At anytime, you can press the
to step through
the above areas. When you are ready to leave the System Setting area,
press ENTER. The unit will reboot to initialize with the new setting.
press ENTER. The unit will reboot to initialize with the new setting.
"
"
DOWN ARROW
BAND NAME
FREQUENCY RANGE
AMERICA 1
FM:87.5-107.9MHz
AM:530-1710kHz
AMERICA 2
FM:87.5-108MHz
AM:520-1620kHz
AMERICA 3
FM:87.5-107.9MHz
AM:530-1620kHz
EUROPE
FM:87.5-108 MHz
AM:522-1620kHz
MIDEAST
FM:87.5-108 MHz
AM:531-1602kHz
AUST(AUSTRALIA)
FM:87.5-108 MHz
AM:522-1710kHz
RUSSIA
FM:65.0-108MHz
AM:522-1620kHz
If AUX Input is disable in System Settings, any input connected will not
be played.
be played.
AUX IN
1
MODE
2
RPT
3
RDM
4
5
-10
ENTER
TA
AF
6
+10
PDF created with FinePrint pdfFactory trial version