Boss Audio mr1520w Guía Del Usuario

Reset button (24) must be activated
with either a ballpoint pen or thin metal
object. The reset button is to be
activated for the following reasons:
- Initial installation of the unit when

all wiring is completed.

- All the function buttons do not

operate.

- Error symbol on the display.
Note: If press reset button (24), the
unit can’t work yet, please use a cotton
swab soaked in isopropyl alcohol to
clean the socket on the front panel.

In radio (AM/FM) mode, press MODE
button (6) for more than three seconds,
the display will appear “EEP INIT”, and
all settings recover factory value.

At tuner mode, press BAND button
(18) shortly to select the desired band.
The reception band will change in the
following order:

FM1

FM2

FM3

AM1

AM2

Press   button (16) or   button (17)
shortly to activate automatic seek
function. Press for more than 3 seconds
until “MAN” appeared on the display,
the manual tuning mode is selected. If
both buttons have not pressed for
several seconds, they will return to
seek tuning mode and “AUTO”
appeared on the display.

STORING & PROGRAM SCANNING
- Automatic memory storing

Press AS/PS (ELAPSE) button (2)
for more than 2 seconds, the radio
searches from the current frequency
and checks the signal strength until

6 strongest stations are stored into
the corresponding preset number
button. When all completed, it will
change to scan preset station
automatically.

- Program scanning

Press AS/PS (ELAPSE) button (2)
shortly to scan all station preset
saved in memory.

The preset buttons (14) can be used
to store 6 stations in each band (FM
1, FM 2, FM 3 and AM1, AM2) for
convenient access to your favorite
stations.
• Programming stations
1. Select the desired band, then tune

in the station you want to store in
memory.

2. Press and hold one of the preset

buttons (14) for more than 2 seconds
until the corresponding preset button
number appears. Repeat steps 1.
and 2. to program additional stations.

•  Quick tuning

Select the desired band, then press
one of the six preset buttons (14).

Press SCAN button (13) to scan
through strong stations in the current
band. Radio pauses for five seconds
at each strong station. At each time
the frequency is flashing on the display.
Press SCAN button (13) again to listen
to current station.

Press   button (16) or   button (17) to
move to the previous track or the
following track. Track number shows
on display.
Hold press   button (16) or   button
(17) to fast reverse or fast forward. Disc
play starts from when you release the
button.

9