Infocus inf4201 Guía De Referencia

1.  Insert the power cord into monitor and into the power outlet. 
2.  Press the power button on the monitor (or using the remote control) to power-on 

the monitor. 

 

With the power on, press the power button on the monitor (or the remote control) to put 
the monitor in a standby mode. To turn off power completely, disconnect the AC power 
cord from the power outlet. 

 Note:   

If there is no signal input for a certain time, the monitor will automatically go to standby 
mode. 

 

1.  Using the remote, press the VOLUME- or VOLUME+ to increase or decrease the 

volume. 

2. Press the MUTE button to temporarily turn off all sound. To restore the sound, 

press the MUTE button again. 

1.  Using the remote, press the desired source button 

(VGA, HDMI1, HDMI2, COMP, VIDEO or S-V) 

2. Or 

press 

SOURCE on the monitor keypad, use the 

arrow buttons (S  T) to navigate to the desired input 
source, and press ENTER: 

 

HDMI 1 

 

HDMI 2 

 

VGA 

 

Component 

 

S-Video 

 

Composite Video 

 

 

 

2.  When the monitor cannot find a source, the following “No signal” message will 

appear (Not shown when InFocus Logo is set to No Signal Screen under Basic 
Settings). 

 

 23