ICOM ic-207h Manual De Instrucciónes

2

INSTALLATION

11

■ Microphone connection

The microphone connector is located behind the front panel.
Connect the supplied microphone as follows:

➀

Slide the supplied microphone cable connector (and at-
tached microphone) into the microphone jack on the main
body of the transceiver until it clicks into place.

➁

To remove the microphone, push the release lever on the
bottom of the microphone cable connector.

■ Separate installation

Using an optional OPC-600/601 

SEPARATION CABLE

, the front

panel can be separated from the main body, doubling as a re-
mote controller.

➀

Detach the front panel as
at right.

➁

Connect a separation
cable between the front
panel and main body
using the supplied screws
as illustrated below.

Connect microphone
here

Rear of front panel

Main body

OPC-600 or OPC-601

➀ 8 V OUT

➁ Freq. up/down

➂ 8 V control IN

➃ PTT

➄ Mic AF (–)

➅ Mic AF (+)

➆ Ground

➇ Data IN

➇

➀