ICOM ic-207h Manual De Instrucciónes

5

24

■ Accessing a repeater

➀

Push [BAND] one or more times to select the desired band.

➁

Set the receive frequency (repeater output frequency).
(pgs. 15–19)

➂

Push and hold 

for 1 sec., one or more times, to se-

lect – duplex or + duplex.

• “DUP –” or “DUP” appears to indicate the transmit frequency for

minus shift or plus shift, respectively.

• When the auto repeater function is turned ON, (available for the

U.S.A. version only), steps 

➁, ➂ are not necessary. (p. 31)

➃ Push [TONE] one or more times to turn ON the subaudible

tone encoder, according to repeater requirements.

• Refer to p. 26 for tone frequency settings.
• When the repeater requires a different tone system, see the page

at right.

➄

Push and hold [PTT] to transmit.

• The displayed frequency automatically changes to the transmit

frequency (repeater input frequency).

• The operating condition is automatically programmed into a

scratch pad memory. See p. 36 for details.

• If “oFF” appears, confirm the offset frequency. (p. 27)

➅

Release [PTT] to receive.

➆ Push [MONI] to check whether the other station’s transmit

signal can be directly received or not.

➇

To return to simplex, push 

for 1 sec., once or twice,

to clear the “DUP” indicator.

➈

To turn OFF the subaudible tone encoder, push [TONE]
one or more times until no tone indicators appear.