ICOM ic-207h Manual De Instrucciónes

11

DTMF MEMORY ENCODER

47

■ Programming a DTMF code via the microphone

[EXAMPLE]: Programming “5428AB453” into DTMF memory channel “d4.”

DTMF codes can be directly programmed via the
keypad on the microphone. The contents can be
overwritten, but cannot be cleared via the micro-
phone. See the previous page for clearing the
contents.

Ä

Push [FUNC] then [

➅DTMF] to turn the DTMF

memory function ON.

• “d” appears in place of the 100 MHz digit.

Å

Push [FSET] to enter the programming condi-
tion.

Ç

Push [Y] or [Z] to select the desired channel.

É

Push the desired digit keys.

• When the first digit is input, previous memory contents are

cleared automatically.

• “E” stands for “

M

” and “F” stands for “#.”

• Push [Y] then [Z], and repeat this step when making a mistake.
• The S/RF indicator shows the digit group. The indication in-

creases every 6 digits.

Ñ

Push [BAND] to exit the programming condition.

• The [ECLR] key cannot be used to exit. If pushed, “A” is input,

and the previously programmed data is erased. Reprogram
again in such a case.

Push

then

DTMF

6