ICOM ic-2100h Manual De Instrucciónes

13

3

■

D

☞

NOTE: Before operating the transceiver for the first time
it’s a good idea to reset the transceiver’s CPU. This will en-
sure that all transceiver settings are at their defaults. See
p. 62 for CPU resetting details.

Push [PWR] for 1 sec. to turn power ON or OFF.

Push [PWR] for 1 sec.

D

The transceiver has 2 basic operating modes: VFO mode and
memory mode.

Push [V/MHz] to select VFO mode when the transceiver is
not in VFO mode.

• If VFO mode is already selected, the digits below 100* kHz disap-

pear. In this case, push [V/MHz] again (or push twice or 3 times de-

pending on version).

*The digits below 1 or 10 MHz disappear for some versions.

Push [VFO] to select VFO mode.

VFO mode is selected.

Appears when memory mode
is selected.

VFO

Note that in this manual, sections beginning with
a microphone icon (as above), designate opera-
tion via the HM-98S microphone.