ICOM ic-2100h Manual De Instrucciónes
29
6
MEMORY OPERATION
■
Transferring memory
contents
contents
This function transfers a memory channel’s contents to VFO
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for
recalling the offset frequency, subaudible tone frequency, etc.
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for
recalling the offset frequency, subaudible tone frequency, etc.
➀
Select the memory channel to be programmed.
➥
Select memory mode by pushing [M/CALL] once or
twice (“
twice (“
!
” appears).
➥
Rotate the tuning dial to select the memory channel.
➁
Push [S.MW] momentarily, then rotate the tuning dial to se-
lect another memory channel to transfer.
lect another memory channel to transfer.
• To transfer to the VFO, push and hold [
(S.MW)
MW] instead of
pushing momentarily.
➂
Push and hold [
(S.MW)
MW] to transfer when a momentary
push was used in the previous step.
Push
+
for 1 sec.
MW
FUNC
A
CLR
S.MW
MW
DUP
T
M
9
5
1
DUP
T
9
5
1
Ä
Set the memory channel to be transferred:
➥
Push [MR] to select memory mode.
➥
Push [
Y
] or [
Z
] to select the memory chan-
nel; or push [
G
ENT] then push the desired
memory channel number (3 digits) to select
the memory channel directly.
the memory channel directly.
Å
Push [FUNC] then [
E
MW] momentarily, then
push [
Y
] or [
Z
] to select another memory chan-
nel to transfer.
• To transfer to the VFO, push [FUNC] then push and
hold [
E
MW] instead of pushing momentarily.
Ç
Push [FUNC] then [
E
MW] for 1 sec. to transfer.
MW