ICOM ic-2100h Manual De Instrucciónes

37

9

SCAN OPERATION

■

D

➥

Common setting:

scan resume condition (p. 41)

➥

For programmed scan: program the scan edges (p. 38)

➥

For memory scan:

program 2 or more memory chan-

nels; set memory skip settings, if
desired (p. 40)

D

➀

Select VFO mode for full/programmed scan with [V/MHz];
or memory mode for memory scan with [M/CALL].

➁

Set the squelch to the point where noise is just muted.

➂

Push [

(V/MHz)

SCAN] for 1 sec. to start the scan.

• To change the scanning direction, rotate the tuning dial.

• The memory channel readout indicates the scan type as follows:

During full scan

Push [SET] to select full scan

or programmed
scan in sequence.

During programmed scan

Indicates scan edge channels.
• P1 stands for 1A/1b.
• P1 to P3 are available when
  they are programmed.

➃

To toggle between full and programmed scan, push [SET].

➄

To stop the scan, push [

(V/MHz)

SCAN].

Ä

Push [VFO] to select VFO mode for full/pro-
grammed scan; or push [MR] to select memory
mode for memory scan.

Å

Set the squelch to the point where noise is just
muted.

Ç

Push [

➁

SCAN] to start the scan.

• [

Y

]/[

Z

] also start the scan when pushed and held.

É

Push [SET] to toggle between full and pro-
grammed scan.

Ñ

To stop the scan push [

➂

SCAN].

SCAN

2

SET

B

During memory scan