ICOM ic-2100h Manual De Instrucciónes
40
9
SCAN OPERATION
■
Skip channel
setting
setting
The memory skip function speeds up scanning by checking
only those memory channels not set as skip channels. Set
skip channels as follows.
only those memory channels not set as skip channels. Set
skip channels as follows.
➀
Select a memory channel:
➥
Select memory mode by pushing [M/CALL] once or
twice.
twice.
➥
Rotate the tuning dial to select the memory channel.
➁
Push [SET] one or more times until “CHS” appears as
shown above.
shown above.
➂
Rotate the tuning dial to turn the skip function ON or OFF
for the selected channel.
for the selected channel.
• “
~
” appears
: The memory channel is skipped during
(CHS-ON)
memory scan.
• “
~
” disappears
: The memory channel is scanned during
(CHS-OFF)
memory scan.
➃
Push [V/MHz] to exit set mode.
USING
SET MODE
The display shows that
memory channel 10 is set
as a skip channel.
memory channel 10 is set
as a skip channel.
M
X
SKIP
9
5
1
Ä
Select a memory channel.
➥
Select memory mode by pushing [MR].
➥
Push [
Y
] or [
Z
] to select a memory channel.
Å
Push [
F
SET] one or more times until “CHS” ap-
pears as shown at left.
Ç
Push [
Y
] or [
Z
] to set or cancel the skip setting.
• See item
➂
at left for skip indicator details.
É
Push [
E
CLR] to exit set mode.
☞
NOTES:
Even though scan edge channels cannot be set as skip
channels, they ARE skipped during memory scan.
channels, they ARE skipped during memory scan.
Memory channels programmed with memory names can-
not be set as skip channels. To set them as skip channels,
first push and hold [ANM] for 1 sec., then set as described
above.
not be set as skip channels. To set them as skip channels,
first push and hold [ANM] for 1 sec., then set as described
above.
SET
B