ICOM ic-703 plus Guía Del Usuario

The new 60 M amateur band became available for use on July 3, 2003.
Operation on this band is allowed on 5 discrete frequencies and must adhere
to the following: 2.8 kHz bandwidth, USB mode, and transmit a maximum of 50
watts ERP (Effective Radiated Power).

■ Operation

It is the operator’s responsibility to set all controls so that the transmission in
the new band meets the stringent conditions under which we may use these
frequencies.

q Push [Y(BAND)] / [Z(BAND)] to select 5 MHz band.
w Push [MODE] momentarily to select USB mode.

• When LSB is selected, push for 1 sec. to select USB mode.

e Rotate the main dial to set the frequency exactly as shown is table above.
r Push [LOCK] momentarily to set the dial lock function ON, if desired. 

Then operate these frequencies.

5.33200 MHz

5.34800 MHz

5.36800 MHz

5.37300 MHz

5.40500 MHz

M1  SPL  A/B  XFC

[MODE]

[LOCK] Main dial

[Y]

[Z]

“USB” appears

A-6241H-3EX

Printed in Japan

© 2003 Icom Inc.

NOTE: We recommend
that you store these fre-
quencies into the memory
channel for easy recall. 

5.33050 MHz

5.34650 MHz

5.36650 MHz

5.37150 MHz

5.40350 MHz