Furuno FA-100 Manuales De Servicio
1 OPERATION
10
SAVE ?
YES
NO
CANCEL
20. Press the [ENT] key to save settings.
1.6 Setting CPA/TCPA
Set the CPA (Closest Point of Approach and TCPA (Time to Closest Point of
Approach) of AIS targets for which you want to be alerted to targets close to
own ship. When a ship whose CPA and TCPA are lower than set here the audio
alarm sounds (if active). (The audio alarm may be activated or deactivated
through the menu. See paragraph 1.12.)
1. Press the [MENU] key to open the main menu.
2. Press the [5] key to open the INIT SETTINGS menu.
3. Press the [5] key to choose SET CPA/TCPA.
Approach) of AIS targets for which you want to be alerted to targets close to
own ship. When a ship whose CPA and TCPA are lower than set here the audio
alarm sounds (if active). (The audio alarm may be activated or deactivated
through the menu. See paragraph 1.12.)
1. Press the [MENU] key to open the main menu.
2. Press the [5] key to open the INIT SETTINGS menu.
3. Press the [5] key to choose SET CPA/TCPA.
[SET CPA/TCPA]
CPA:
0
.90 nm
TCPA:
01 min
ACTV:
DSBL
+ -
Dialog box for entry of CPA/TCPA
4. Enter desired CPA (setting range: 0-6.00 nm) with the numeric keys and
then press the [NEXT] key to choose TCPA.
5. Enter desired TCPA (setting range: 0-60 min) with the numeric keys and
then press the [NEXT] key to chose ACTV.
6. Press the [SFT/ +/-] key to choose ENBL to activate the CPA/TCPA alarm;
DSBL to disable it.
7. Press the [ENT] key to return to the INIT SETTINGS menu.
8. Press the [MENU] key. You are asked if you are sure to save settings.
8. Press the [MENU] key. You are asked if you are sure to save settings.
SAVE ?
YES
NO
CANCEL
SAVE confirmation screen
9. Press the [ENT] key to save settings.
If, when ACTV is set to ENBL, a target whose CPA and TCPA are lower than
set here is detected, the message WNG COLLISION appears and the audio
alarm sounds (if active). Press the [CLR/ALM] key to erase the message and
silence the alarm.
If, when ACTV is set to ENBL, a target whose CPA and TCPA are lower than
set here is detected, the message WNG COLLISION appears and the audio
alarm sounds (if active). Press the [CLR/ALM] key to erase the message and
silence the alarm.