Furuno gp-150-dual Guía Del Usuario

 

You may enlarge/shrink the display on the 
Plotter 1, Plotter 2 and Highway displays, 
with the 

ZOOM IN and ZOOM OUT keys. The 

horizontal range is available among 0.25, 0.5, 
1, 2, 4, 8, 16, 32, 64, 128 and 192 nautical 
miles. For the Plotter 1 display the ranges are 
0.36, 0.71, 1.42, 2.84, 5.69, 11.38, 22.76, 
45.51, 91.02, 182.04 and 273.07 nautical 
miles. 
 
The 

ZOOM IN key enlarges the display and 

the 

ZOOM OUT key shrinks it. Each time a 

zoom key is pressed the horizontal range 
appears at the center of the display for about 
one second. 
 
 

Display orientation can be selected on the 
Plotter 1 and Plotter 2 displays, with the 

NU/CU ENT key. Two display orientations are 

available: north-up and course-up. 
 

In the north-up display, true north (0°) is at 
the top of the display. Own ship moves on the 
display in accordance with true speed and 
true motion. Land is stationary. 
 

Ship’s course is upward on the screen at the 
moment the course-up mode is selected and   
the north mark ( ) appears at the left side of 
the display.   
 

Ship's heading or course is at the top of the 
display. The north mark appears at the left 
side of the display. 
 
 

The cursor (+) functions to select location for 
a mark; erase marks; measure range and 
bearing, etc. 
 

Cursor state determines what data are shown 
on the display. 
 

Cursor position is displayed in latitude and 
longitude or LOPs (depending on menu 
setting) at the top of the display. The range 
and bearing from own ship to the cursor 
appear at the right hand side of the display, 
when in the Plotter 1 display. 

234

°

 

BRG

345

°

 

BRG TO +

123

°

 

11.5

RNG TO +

nm

COG

2.0 nm

Cursor mark             Cursor position in
                                 latitude and longitude

Cursor

Range from own

ship to cursor

Bearing from own

ship to cursor

°

°

WGS84