Furuno gp-150-dual Guía Del Usuario

5. SETTING DESTINATION 
 
 

Flags are erased at both GPS navigators 
when they are sharing data. 
 
1)  Place the cursor on the flag to erase. 
2) Press the 

CLEAR key. The message 

shown in Figure 5-17 appears if the 
waypoint is currently selected as 
destination, is part of a registered route, 
or is part of the route currently being 
navigated. 

  1st line
Are you sure to erase ?
ENT:Yes     MENU:No

This wpt is GOTO

This wpt is in registered route

This wpt is in selected route

 
3) Press the 

NU/CU ENT key. 

 

Note: Flags can be erased collectively by 

clearing the Plotter memory or both the 
Plotter memory and GPS memory. See 
page 9-1 for further details. 

 

When the origin waypoint is erased the 
waypoint before it becomes the origin 
waypoint. If there is no waypoint before the 
origin waypoint, current position becomes the 
origin waypoint. 

Delete

Starting

point

Own
ship

Course

Destination
waypoint

Destination
waypoint

 
When a destination is erased, the waypoint 
which follows it becomes the destination. If 
there is no waypoint after the destination 
waypoint erased, route navigation is 
cancelled.