Furuno fi-301 Manuales De Servicio
56
14 Specifications
14.1 Technical specifications
Dimensions:
Multi Control instrument: 113 x 113 x23 mm
(4.3x4.3 inch).
Server: 110 x 165 x 30 mm. (4.3x6.5x1.2 inch)
(4.3x4.3 inch).
Server: 110 x 165 x 30 mm. (4.3x6.5x1.2 inch)
Instrument cable:
8 m (26 ft).
Power supply:
12V DC (10-16V). The instruments are polarity protected
Power
consumption at 12V:
consumption at 12V:
Multi Control instrument: 0.08W
with maximum lighting 0.8W.
Server: 0.2W.
with maximum lighting 0.8W.
Server: 0.2W.
Temperature range:
Storage:-30°to +80°C (-22°to +176°F)
Operation: -10° to +70°C(14°to +158°F)
Operation: -10° to +70°C(14°to +158°F)
Weight:
Multi Control instrument:
260 gram (9.17 oz).
Server:
220 gram. (7.76 oz).
Enclosure:
Multi Control Instrument:
Water proof
Server:
Splash proof
CE approval
The products conforms to the EMC requirements for immunity and emission according
to EN 50 08-1.
The products conforms to the EMC requirements for immunity and emission according
to EN 50 08-1.
14.2 Nexus Network introduction and user policy
Introduction:
The Nexus data bus is a multi talker multi receiver data bus specially designed for
marine navigation applications. It utilises the RS485 standard with up to 32 senders
and/or receivers to form a Local Area Network. Data is transmitted synchronously with
1 start-bit, 8-data-bits, 1 parity-bit, two stop-bits in 9600 baud.
The Nexus data bus is a multi talker multi receiver data bus specially designed for
marine navigation applications. It utilises the RS485 standard with up to 32 senders
and/or receivers to form a Local Area Network. Data is transmitted synchronously with
1 start-bit, 8-data-bits, 1 parity-bit, two stop-bits in 9600 baud.
User policy:
The Nexus data bus is open for new users and applications without a licence or a
licence fee. The data bus is, however, the property of the manufacturer, which means
the specification must be followed in order to protect the manufacturer’s commitments
to the Nexus data bus performance and safety.
For most PC-applications, the full duplex interface, will be a very useful tool for
monitoring real time data, to edit and store waypoints to PC-file or to Server. The
interface is supplied with a cable for connection from PC to the Server or FI-30
instruments. A 9-pole D-sub connector is connected to the RS232 port on the PC.
The Nexus data bus is open for new users and applications without a licence or a
licence fee. The data bus is, however, the property of the manufacturer, which means
the specification must be followed in order to protect the manufacturer’s commitments
to the Nexus data bus performance and safety.
For most PC-applications, the full duplex interface, will be a very useful tool for
monitoring real time data, to edit and store waypoints to PC-file or to Server. The
interface is supplied with a cable for connection from PC to the Server or FI-30
instruments. A 9-pole D-sub connector is connected to the RS232 port on the PC.