Furuno gr-80 Manuales De Servicio

After installing the equipment, enter baud
rate of connected GPS receiver, output data
byte format and your area as follows:

Default settings

Baud rate:

4800 bps

Output data byte format: 6 of 8
Your area:

Area 1 (USA,
Canada, Ber-
muda, Brazil)

1. Press [MENU] and [RESET] together.

Release the keys when the display shows
"SELF TEST?"

2. Press the [▼] key once to display "SET

BAUD RATES?"

3. Press the [ENT] key.

4. Press [▲] or [▼] to select baud rate

which matches that of connected GPS
navigator; 300, 600, 1200, 2400, 4800,
9600, 14400, 19200 bps.

5. Press the [ENT] key. "SET DATA FOR-

MAT?" appears.

6. Press the [ENT] key.

7. Press [▲] or [▼] to select output data

byte format; 6-8 or 8-8.

8. Press the [ENT] key.

9. Press the [RESET] key to reset the CPU

and return to the normal operation mode.

10.Press the [MENU] key. "SET RCV

MODE?" appears.

11. Press [▲] or [▼] to display "SET STN

AREA?"

12.Press the [ENT] key.

13.Press [▲] or [▼] to select your area (your

vessel's location);

AREA 1: USA, Canada, Bermuda,

Brazil

AREA 2: Europe
AREA 3: Australia, Japan, Korea

14.Press the [ENT] key.

15.Press the [MENU] key to close the menu.

Signal level:

RS-232C or RS-422

RTCM ver. no.: 2.01
Byte format:

8-6 or 8-8

First bit:

LSB

Parity bit:

NONE

Stop bit:

1

Bit rate:

8