Furuno MFD8 Guía Del Usuario
8. File Operations
8-3
8.3
How to Export Tracks, Points and Routes,
User Setup
User Setup
When the capacity for track is reached, the oldest track is erased to clear space for
new track. Points and routes cannot be entered when their related memories are full.
If you need to save track, points and routes permanently, save them to a SD card. You
can also save user settings to a SD card to use the settings on other MFD units.
new track. Points and routes cannot be entered when their related memories are full.
If you need to save track, points and routes permanently, save them to a SD card. You
can also save user settings to a SD card to use the settings on other MFD units.
1.
Put a blank formatted SD card in either card slot.
2.
Press the MENU key to open the menu.
3.
Open the [Files] menu.
4.
Select [Export Tracks], [Export Points and Routes] or [Export User Setup]. The
screen shown below appears.
screen shown below appears.
5.
Rotate the RotoKey to select [Yes] then push the key. For Points and Routes or
User Setup, enter a filename. For track, select a track file.
User Setup, enter a filename. For track, select a track file.
6.
Do one of the following:
Points and Routes, User Setup: Use the RotoKey to enter a file name. Push the
RotoKey to validate.
Track: Use the RotoKey to select the track file to export. Push the RotoKey to
validate. After the file is exported, the message “[file name] is exported” appears;
push the RotoKey to finish.
Points and Routes, User Setup: Use the RotoKey to enter a file name. Push the
RotoKey to validate.
Track: Use the RotoKey to select the track file to export. Push the RotoKey to
validate. After the file is exported, the message “[file name] is exported” appears;
push the RotoKey to finish.
7.
After the equipment has exported the selected item, press the MENU key to close
the menu.
the menu.
An SD Card has been detected on MCU001Upper (Lower) Slot. Do you want
to continue?
to continue?
For Points & Routes User Setup For Track