Furuno MFD8 Guía Del Usuario
2. Chart Plotter
2-12
2.10
Alarms
This section describes the alarms available with the chart plotter:
• XTE alarm
• Anchor watch alarm
• Proximity alarm
• Depth alarm
• Sea surface temperature alarm
• Sea surface temperature shear
• Speed alarm
• Trip log alarm
• Countdown timer
• Alarm clock
2.10.1
XTE Alarm
The XTE alarm tells you when your vessel is not on course by more than the set value.
When the XTE alarm is active, two dashed lines mark the XTE alarm boundaries, red
for starboard, green for port.
When the XTE alarm is active, two dashed lines mark the XTE alarm boundaries, red
for starboard, green for port.
2.10.2
Anchor Watch Alarm
The anchor watch alarm tells you that your vessel has moved a distance greater than
the set value when the vessel must not be moving.
the set value when the vessel must not be moving.
Destination
waypoint
waypoint
Own ship
position
position
Alarm
setting
setting
Intended
course
course
Alarm
Your ship's position where
you start the anchor watch
alarm.
you start the anchor watch
alarm.
: Alarm
area
area
Alarm
setting
setting