Furuno MFD8 Guía Del Usuario
4. Points
4-2
4.2
How to Mark a Point
You can mark a point
• At current position
• At cursor position
• From the Points list
4.2.1
How to Mark a Point at Current Position
Press the SAVE/MOB key to mark a point at current position. The following occurs.
• The default point symbol is put at current position.
• The point is saved to the Points list under the youngest empty point number
4.2.2
How to Mark a Point at Cursor Position
POINTS/ROUTES key
Use the CursorPad to put the cursor on a location. Press the POINTS/ROUTE key.
The default point symbol is put at the cursor position. The point is saved to the Points
list and marked with the youngest empty point number.
The default point symbol is put at the cursor position. The point is saved to the Points
list and marked with the youngest empty point number.
Pop-up menu
You can also put a point at the cursor position with the Cursor Position pop-up menu,
shown below. Use the RotoKey to select [New Point] then push the key to put a point
at the cursor position.
shown below. Use the RotoKey to select [New Point] then push the key to put a point
at the cursor position.
Go To
Go To by Position
New Point
New Route
Center on Boat