Furuno MFD8 Guía Del Usuario

4.  Points

When you go to a point, you can restart 
the navigation to the point from current 
location.

When you steer to keep away from an 
obstruction or the vessel drifts, you go 
off course as shown in Line 1 in the fig-
ure. If you do not need to return to the 
original course, you can go to the point 
from the current position as shown in 
Line 2 in the figure.

1.

Use the CursorPad to put the cursor on the dashed line of the route.

2.

 Push the right-click button to show the Route Follow pop-up menu.

3.

Use the RotoKey to select [Restart].
The route start position for the route moves to the current position and the XTE 
becomes zero.

1.

Use the CursorPad to put the cursor on the dashed line of the route.

2.

Push the right-click button to show the Route Follow pop-up menu.

3.

Use the RotoKey to select [Cancel Route].

The dotted line from your vessel to the point is erased from the screen. To again go to 
the point:

1) Select the point on the screen.

2) Open the Points pop-up menu.

3) Select [Go To] then push the RotoKey.

Navigation is then restarted from the point at which the navigation was stopped. 

Original course

Obstacle

Line 1

Line 2

Restart
Extend Route
Route Info