Furuno 511 Manuales De Servicio

3. STEERING MODES 

The [TURN/MENU] key provides the various turning motions depending on the 
mode in use. There are five different turn type; 180º or 360º turns (for AUTO 
mode only), ORBIT, SPIRAL and FIGURE EIGHT. All turn type are available in 
clockwise and counterclockwise direction. To activate the TURN mode: 
 
1.  Press the [TURN/MENU] key once to show the TURN menu. 

This menu will change based on the mode currently in use.   

360
ORBIT
SPIRAL

AUTO mode

FIGURE EIGHT

180
360

ORBIT

SPIRAL

SPIRAL

ORBIT

SPIRAL

STBY, NAV mode

RADIUS OF ORBIT: 0.05 nm
PUSH MENU KEY IN ORDER TO
GO TO MENU.

FIGURE EIGHT

RADIUS OF ORBIT: 0.05 nm
PUSH MENU KEY IN ORDER TO
GO TO MENU.

2.  Rotate the course control knob to select a mode. 

The arrow next to the mode name shows the direction to turn. 

3.  Press the course control knob to execute. 

Press the [TURN/MENU] key twice to close the TURN menu. 

 
Note:

 When TLL data is input from a radar or echo sounder connected, the 

following TURN menu appears. For details, see page 3-15. 

SPIRAL

ORBIT

SPIRAL

FIGURE EIGHT

RADIUS OF ORBIT: 0.05 nm

REEIVED EXTERNAL TLL.

CANCEL

NAV