Pioneer pro-1130hd Guía De Operación

En

This system is equipped with two terminals for inputting TV 

broadcasting signals: ANT/CABLE A IN and ANT B IN. The 

ANT/CABLE A IN terminal accepts both digital and 

conventional TV broadcasting signals while the ANT B IN 

terminal accepts only conventional TV broadcasting signals. 

When using cable TV to watch digital and/or conventional TV 

channels, connect to the ANT/CABLE A IN terminal as shown. 

In addition, you may connect an antenna to the ANT B IN 

terminal as shown; use an outdoor antenna to enjoy clearer 

pictures. If your outdoor antenna uses a 75-ohm coaxial cable 

with an F-type connector, plug it into the antenna terminal at 

the rear of the Media Receiver.

• Be sure to connect coaxial cables as shown above. Signal 

reception may fail if not properly connected.

• In order to watch cable TV channels, be sure to connect the 

cable to the ANT/CABLE A IN terminal.

• The ANT/CABLE A IN and ANT B IN terminals must not 

receive the same signals. For example, do not connect a 

cable from a cable TV to both the ANT/CABLE A IN and ANT 

B IN terminals. Similarly, do not connect a cable from an 

antenna to both the ANT/CABLE A IN and ANT B IN 

terminals.

Use the INPUT 1 terminals to connect a Cable box.

• You can also connect to the INPUT 1 S-VIDEO terminal 

instead of the INPUT 1 VIDEO terminal; use a commercially 

available S-Video cable.

• If using a Cable box that supports digital TV channels and 

has an RF output terminal, you can connect that terminal to 

the ANT/CABLE A IN terminal using a commercially 

available coaxial cable.

• When connecting a Cable box to the INPUT 1 terminal, be 

careful not to loop the cable.

COM

V

R-AUDIO-L

S-VIDEO

VIDEO

OUT

I N

AV cable

(commercially available)

PRO1130HD.book  Page 20  Monday, July 11, 2005  9:26 AM