Pioneer pro-1130hd Guía De Operación

En

The system will be automatically placed into the standby mode 

when no operation is performed for three hours.

Press HOME MENU.

Select “Power Control”. ( /  then ENTER)

Select “No Operation off”. ( /  then ENTER)

Select “Enable”. ( /  then ENTER)

Press HOME MENU to exit the menu.

• Five minutes before the system is placed into the standby 

mode, a message appears every minute.

The system will be automatically placed into the standby mode 

when no signal is received from the personal computer.

Press HOME MENU.

Select “Power Control”. ( /  then ENTER)

Select “Power Management”. ( /  then ENTER)

Select “Mode1” or “Mode2”. ( /  then ENTER)

Press HOME MENU to exit the menu.

Adjusts the horizontal and vertical positions of images on the 

Plasma Display.

Press HOME MENU.

Select “Option”. ( /  then ENTER)

Select “Position”. ( /  then ENTER)

Select “H/V Position Adjust”. ( /  then ENTER)

Adjust the vertical position ( / ) or horizontal position 

( / ).

Press HOME MENU to exit the menu.

• To restore the factory defaults for all the items, press  /  to 

select “Reset” in step 4, and then press ENTER. A 

confirmation screen appears. Press  /  to select “Yes”, and 

then press ENTER.

• Adjustments are stored separately for each input source.

Use Auto Setup to automatically adjust positions and clock of 

images coming from a personal computer.

Press HOME MENU.

Select “Option”. ( /  then ENTER)

Select “Auto Setup”. ( /  then ENTER)

• Auto Setup starts.

Press HOME MENU to exit the menu.

• When Auto Setup is finished, “Auto Setup completed.” 

appears.

• Even when “Auto Setup completed.” appears, Auto Setup 

may have failed, depending on conditions.

• Auto Setup may fail with a PC image composed of similar 

patterns or monochrome. If not successful, change the PC 

image and try again.

• Be sure to connect the computer to the Media Receiver and 

switch it on before starting Auto Setup.

Does not place the system into the standby mode.

Places the system into the standby mode if no 

operation is performed for three hours.

No power management 

• Places the system into the standby mode when no 

signal is received from the personal computer for 

eight minutes.

• Even when you start using the computer and a 

signal is received again, the system stays off.

• The system is switched on again by pressing 

 on the Media Receiver or TV  on 

the remote control unit.

• Places the system into the standby mode when no 

signal is received for eight seconds. 

• When you start using the computer and a signal is 

received again, the system is switched on.

• The system is switched on again by pressing 

 on the Media Receiver or TV   on 

the remote control unit.

PRO1130HD.book  Page 64  Monday, July 11, 2005  9:26 AM