Bunn MCA Guía Del Usuario

ROUTINE CLEANING

Before beginning any cleaning procedure, unplug the brewer to

avoid the accidental start of a brew cycle.

Clean the pod holder, drip tray and drip tray grate after each

use, using a damp cloth and mild detergent and rinse. With the pod

holder and drip tray removed, use a damp cloth with mild detergent

to wipe the area below the pod holder and into the drip tray area.

Occasionally, wipe the outside of the brewer with a damp cloth.

(The reservoir, slide lid, pod holder, drip tray and drip tray grate are
dishwasher safe.)

PERIODIC CLEANING/DESCALING

(Recommended At Least Once a Month.)

Periodically, you should clean and descale the brewer to clear any mineral deposits

that may have accumulated due to impurities in the water source. If these deposits are not

removed, they can impair the operation of the brewer and reduce the product life.

There are several products available specifically for descaling. We recommend using

URNEX

Activated Descaler or JavaClean2 Cleaner and Descaler, available on our web

site: www.bunn.com. (White vinegar can be used to descale if a descaling product is not

available.)

Follow the directions as printed on the manufacturer’s package.

1) Fill the reservoir with descaling product as described by the manufacturer’s directions,

or 32 oz. (946 ml) of white vinegar. Do not add powder mix

directly to the reservoir. Descaling product must be mixed

into a solution before it is added to the reservoir.

2) Place an empty pod holder into the brewer. Be sure the holder

is locked into place, and set the VOLUME CONTROL SLIDE

LEVER to the maximum position.

3) Place an empty container or bowl on the drip tray grate that

will hold at least 14 oz. (414 ml) of liquid, and press the

COFFEE BREW BUTTON to start a brew cycle.

4) Once the brew cycle has finished, empty the container and

set it back onto the drip tray grate. Press the COFFEE BREW

BUTTON again to start a second brew cycle.

5) Once the brew cycle has finished, empty the container and

the remaining solution, or vinegar from the reservoir. Remove

the pod holder; clean the reservoir and pod holder thoroughly

using a mild detergent, then rinse.

NOTE: There is now descaling solution in the internal tank. Follow

the manufacturer’s directions if the solution must be left in the tank

for any period of time. For vinegar, allow the solution to sit for at

least two, but no more than four hours.

6) Fill the reservoir to the “MAX” line with fresh clean cold water

and place the pod holder back into the brewer.

7) Place the empty container back onto the drip tray grate and

press the COFFEE BREW BUTTON to begin a brew cycle.

P3028

P2958

P2908

P2963