Bunn cdbcf 15 Guía Del Usuario
Page 11
COMPONENT ACCESS
This section provides procedures for testing and
replacing various major components used in this
brewer should service become necessary. Refer to
Troubleshooting for assistance in determining the
cause of any problem.
brewer should service become necessary. Refer to
Troubleshooting for assistance in determining the
cause of any problem.
WARNING - Inspection, testing, and repair of electri-
cal equipment should be performed only by qualifi ed
service personnel. The brewer should be unplugged
when servicing, except when electrical tests are re-
quired and the test procedure specifi cally states to
plug in the brewer.
cal equipment should be performed only by qualifi ed
service personnel. The brewer should be unplugged
when servicing, except when electrical tests are re-
quired and the test procedure specifi cally states to
plug in the brewer.
WARNING - Disconnect the brewer from the power
source before the removal of any panel or the replace-
ment of any component.
source before the removal of any panel or the replace-
ment of any component.
All components are accessible by the removal of
the top cover or warmer housing, front access panel
and warmer plate(s).
and warmer plate(s).
Refer to wiring diagrams at the back of this manual
when reconnecting wires.
when reconnecting wires.
FIG. 11-1 COMPONENT ACCESS
FIG. 11-2 COMPONENT ACCESS
39132 062309