Bunn ICB Guía Del Usuario

Descargar
Página de 70
Page 22
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL  2 (cont.)
SET NEW RECIPE (to set a new COFFEE recipe using 
a Smart Funnel or RECIPE CARD)
Using a Smart Funnel and a G9-2T DBC or MHG 
Grinder:
This function allows the operator to set BREW VOL-
UMES, BYPASS PERCENTAGE, PULSE BREW TIMES 
AND DRIP OUT TIMES
 for each coffee name preset in 
the grinder’s memory.
Certain coffee names are stored in the grinder’s memory.  
When a particular name of coffee is ground into the 
Smart Funnel, that name and the batch size selected 
are transferred from the grinder to the programming 
CHIP located in the funnel handle.  The funnel is then 
inserted into the brewer’s funnel rails.  The SENSING 
COIL
 on the brewer reads the information contained in 
the handle.  The name of the coffee fl avor will then ap-
pear on the display.  This allows the operator to set the 
BREW VOLUME, %BYPASS, PULSE BREW TIMES and 
DRIP OUT TIME for that particular coffee name.  It also 
allows the operator to set other brewing parameters, 
such as BREW TEMPERATURE, BREW LOCKOUT, etc.  
Each coffee name can be set individually to provide 
optimum brewing quality.
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
CYCLES THROUGH
TWO SCREENS
2 SEC.
FUNNEL DETECTED
FUNNEL CONTAINS
NO NAME
FUNNEL
CONTAINS NAME
SET UP BREW VOLUMES, BYPASS PERCENTAGE,
PULSE BREW TIMES, AND DRIP OUT TIME
SEE SEPARATE DIAGRAMS
FOR SETUP INSTRUCTIONS
MUST GRIND INTO
FUNNEL FIRST
QUIT SETUP?
YES
INSERT FUNNEL
WITH NEW NAME
SET TEMP XXX°
NO                      YES
SET NEW RECIPE?
NO                      YES
2 BATCHES DONE?
NO                      YES
BEGIN SETUP OF
(COFFEE NAME)
(COFFEE NAME)
NO                      YES
(COFFEE NAME)
SETUP COMPLETE
P2854
37077 101205