Bunn ITCB Guía Del Usuario

Page 8

A. ON/OFF SWITCH

 

Pressing the "ON/OFF" pad will alternately turn the brewer on and off. Pressing this pad during the brew cycle 

will interrupt the brew cycle, stopping the flow of water. Pressing this pad during programming of the brewer 

will exit the setup and return to the main screen.

B. PROGRAMMING (left)

 

This hidden pad can be used to scroll backwards through the function list while in programming mode.

C. BREW  (A,B,C) and FUNCTION

When the ON/OFF is ON and the brewer is on the main screen (not in programming mode), momentarily 

pressing and releasing this pad will begin a brew cycle. These are also used to program the brewer when in the 

programming mode.

D. PROGRAMMING (right)

Pressing and holding this pad allows entry into the programming menus. Pressing and releasing the pad 

steps through each function screen while in the programming mode.

E. BATCH SELECTOR PADS

Pressing the pad corresponding to the Half or Full batch selects the amount of product to be brewed. Pressing 

a different pad after a brew cycle has been initiated does not change the brew batch in progress. Light indicates 

the selected batch to brew. Also used in programming to adjust settings on both batch sizes.

F. FUNCTION SCREEN

This is the display which shows the various functions of the brewer and allows the programming to be ac-

complished.

G. FUNNEL SENSING COIL

This is used to "receive" information from the Smart Funnel handle, recipe cards, and ad cards.

D

B

C

READY TO BREW

WATER TEMP: 205°

A

G

F

E

36748 041504