Bunn LCA-2 LP Guía De Operación

11

Periodic  rinsing  of  the  mix  chambers  and  dispense  tips  is  essential  for  proper  maintenance  and  optimum 

performance of the dispenser. The automated Rinse Alarm feature has two levels of operation, Disabled and 

Warning.

Disabled 

 

 

None

Warning 

Rinse LED will come on 4 hrs prior to the selected time interval and remain on 

until the Rinse procedure has been performed. The dispenser will continue to 

serve product.

NOTE: The time interval between Rinses is adjustable from 0 to 24 hrs. 

The dispenser is shipped with the automated Rinse Alarm disabled, (No Alarm). It is up to the user to determine the 

Rinse time interval and the level of warning required, based on their application and maintenance procedures.

To enable the automated Rinse Alarm feature, refer to RINSE ALARM in Programming the Dispenser.

Rinse Procedure:

1.  Open the cabinet door and select Rinse on the Function Selector switch – close the door.

2.  Place a 2 Liter (1/2 Gal) container under the Left dispense tip.

3.  Activate the Left dispenser until water flow stops automatically, approximately 20 sec. 

4.  Repeat Steps 2 & 3 for the Right dispense tip.

NOTE: The Rinse LED will turn OFF, when the Rinse procedure has been satisfied for both sides.

5.  Open the cabinet door and select Normal on the Function Selector switch – close the door.

5

1

38791 031606