Bunn LCR-2 Guía De Operación

4

CAUTION:  The dispenser must remain disconnected from power source until specified in Electrical Hook-Up.

 

The LCR-2 dispenser is supplied with a 120-volt / 15 Amp cord set and require a 2-wire, grounded, individual branch 

circuit rated for 120 volts AC, 15 amp, single phase, 60Hz.  The mating connector must be a NEMA 5-15R.

 

The LCR-2C dispenser is supplied with a 120-volt / 20 Amp cord set and require a 2-wire, grounded, individual branch 

circuit rated for 120 volts AC, 20 amp, single phase, 60Hz.  The mating connector must be a NEMA 5-20R.

 

These dispensers can be Field Wired for 208 or 240 volt applications. This requires a 2 or 3-wire, grounded, individual 

branch circuit rated for 208/240 volts AC, 30 amp, single phase, 60 Hz. 

NOTE:   The internal terminal block must be rewired for 208/240 applications, (see Optional Field Wiring Diagram).

120V A.C.

120V A.C.

208 or

240V A.C.

HEATER RED

208 or

240V A.C.

120V A.C.

10A. FUSE - WHITE

HEATER RED

10A. FUSE - WHITE

10A. FUSE - BLACK

LIMIT SW. - BLACK

HEATER RED

10A. FUSE - WHITE

10A. FUSE - BLACK

LIMIT SW. - BLACK

10A. FUSE - BLACK

LIMIT SW. - BLACK

For all 208 - 240 Volt Connections: Use No. 10 AWG Wires suitable for 90°C (194 °F)

1. Unit shipped per Fig. 1, wired for 120V A.C./2-Wire.

2. For 208 - 240V A.C./2-Wire per Fig. 2: Move both the Red-Heater wire and the White-Fuse wire to the Top Red Terminal as shown.

3. For 120/208 - 240V A.C./3-Wire per Fig. 3: Move the Red Heater wire to the Top Red Terminal as shown.

Fig. 1

Fig. 2

Fig. 3

208-240 V, 25.8 A, 6200 W

1PH, 2-Wire + GND, 60HZ

or

120/208-240 V, 25.8 A, 6200 W

1PH, 3-Wire + GND, 60HZ

28181.0003

230 V,  26 A,  6000 W

1PH,  2-Wire + GND,  50/60HZ

or

230 V, 13 A, 3000W

1PH, 2-Wire + GND, 50/60HZ

29710.0014

39762.0000

36026 031307

120V A.C.

120V A.C.

208 or

240V A.C.

RED

208 or

240V A.C.

120V A.C.

TO MASTER

ON/OFF

SWITCH

BLACK

RED

TO MASTER

ON/OFF

SWITCH

BLACK

RED

TO MASTER

ON/OFF

SWITCH

BLACK

For all 208 - 240 Volt Connections: Use No. 10 AWG Wires suitable for 90°C (194°F)

1. Unit shipped per Fig. 1, wired for 120V A.C./2-Wire.

2. For 208 - 240V A.C./2-Wire per Fig. 2. 

3. For 120/208 - 240V A.C./3-Wire per Fig. 3.

Fig. 1

Fig. 2

Fig. 3