Bunn single multi-brewwise dbc Guía De Operación
Page 15
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
WARMER OFF: OFF
(-) DONE (+)
P3204
WARMER OFF:
This function allows the operator to set a predeter-
mined time for the warmer to shut off in a range from
15 minutes to 6 hours in increments of 15 minutes.
15 minutes to 6 hours in increments of 15 minutes.
Procedures to set the warmer shut off time:
1. Press and hold the ® pad until the display reads
1. Press and hold the ® pad until the display reads
WARMER OFF.
2. Pressing (-) in this screen will count down the shut
off time starting at 6:00 hours and decrease in
increments of 0:15 minutes.
increments of 0:15 minutes.
3. Pressing (+) in this screen will set the shut off time
at 0:15 minutes and count up to 6:00 hours in
increments of 0:15 minutes.
increments of 0:15 minutes.
4. When finished, press DONE to advance to the next
function screen, or press the "ON/OFF/LOWER"
pad on the front switch panel to exit the WARMER
OFF function and return to the MAIN SCREEN.
pad on the front switch panel to exit the WARMER
OFF function and return to the MAIN SCREEN.
NOTE: For whatever time is selected for the warmers
to shut off, the warmer switch LED will begin to flash
5 minutes prior to shutting off.
to shut off, the warmer switch LED will begin to flash
5 minutes prior to shutting off.
NOTE: For ICED Beverages (Tea and Coffee), the lower
warmer will not be energized. This will allow for a lower
temperature in the final product. Some residual heat
may still be present when immediately following the
brewing of a hot beverage.
warmer will not be energized. This will allow for a lower
temperature in the final product. Some residual heat
may still be present when immediately following the
brewing of a hot beverage.
37467 110904