TOA hb-1 Guia De Especificaciones
HB-1 FLUSH-MOUNT SUBWOOFER
Tel: 800-733-7088
Fax: 800-733-9766
www.toaelectronics.com
S
P E C I F I C A T I O N S
TOA E l e c t r o n i c s , I n c .
601 Gateway Boulevard
Suite 300
South San Francisco, CA 94080
Suite 300
South San Francisco, CA 94080
Tel: 800-733-7088 Fax: 800-733-9766
www.toaelectronics.com
TOA C a n a d a Co r p.
Tel: 905-564-3570 Fax: 905-564-3569
A
R C H I T E C T
’
S
& E
N G I N E E R
’
S
S
P E C I F I C A T I O N S
The subwoofer shall be a tuned, ported enclosure with acoustic
bandpass filter design.The enclosure shall be compact and suitable for
flush-mount installation in a space 14.17" x 18.9" (360 mm x 480 mm) and
occupy a maximum depth of 4.1" (103 mm) including board thickness.The
loudspeaker component shall have a diameter of 8" (20 cm) with ferrite
magnet, rubber surround and a nominal impedance of 8 ohms.The rated
power handling from 40 to 200 Hz (-10 dB) shall be 240 W Continuous
Program and 80 W Continuous Pink Noise.The frequency response shall be
45 - 200 Hz (-10 dB, 1/2 space).The output sound pressure level shall be 91
dB SPL (half-space) at a distance of one meter with one watt of input
power applied.The subwoofer enclosure shall be steel plate with a black
paint finish.The grille frame shall be constructed of fire-resistant ABS resin
with a white, paint-ready finish.The mounting bracket shall be of heavy-
duty steel construction.The input connector shall be a removable terminal
block with screw terminals allowing two pairs of speaker wire for input and
loop-through terminations. An optional low pass filter module shall be
available for system equalization. An optional matching transformer shall
be available for connecting the subwoofer to a distributed speaker system.
The transformer shall mount inside the subwoofer enclosure with selectable
wattage taps of 60 W, 30 W, 15 W and 7.5 W at 70.7 V line and 60 W, 30 W
and 15 W at 100 V line. The enclosure dimensions shall be 16.93" W x
21.42" H x 5.32" D (430 mm x 544 mm x 135 mm) and the weight shall be
24.25 lbs. (11 kg).
bandpass filter design.The enclosure shall be compact and suitable for
flush-mount installation in a space 14.17" x 18.9" (360 mm x 480 mm) and
occupy a maximum depth of 4.1" (103 mm) including board thickness.The
loudspeaker component shall have a diameter of 8" (20 cm) with ferrite
magnet, rubber surround and a nominal impedance of 8 ohms.The rated
power handling from 40 to 200 Hz (-10 dB) shall be 240 W Continuous
Program and 80 W Continuous Pink Noise.The frequency response shall be
45 - 200 Hz (-10 dB, 1/2 space).The output sound pressure level shall be 91
dB SPL (half-space) at a distance of one meter with one watt of input
power applied.The subwoofer enclosure shall be steel plate with a black
paint finish.The grille frame shall be constructed of fire-resistant ABS resin
with a white, paint-ready finish.The mounting bracket shall be of heavy-
duty steel construction.The input connector shall be a removable terminal
block with screw terminals allowing two pairs of speaker wire for input and
loop-through terminations. An optional low pass filter module shall be
available for system equalization. An optional matching transformer shall
be available for connecting the subwoofer to a distributed speaker system.
The transformer shall mount inside the subwoofer enclosure with selectable
wattage taps of 60 W, 30 W, 15 W and 7.5 W at 70.7 V line and 60 W, 30 W
and 15 W at 100 V line. The enclosure dimensions shall be 16.93" W x
21.42" H x 5.32" D (430 mm x 544 mm x 135 mm) and the weight shall be
24.25 lbs. (11 kg).
The subwoofer shall be the TOA HB-1.
Literature Order #: L-HB-1
Specifications subject to change without notice.
Specifications subject to change without notice.
© 2004 TOA Electronics, Inc.