ConnectGear gs-1124 Guía Del Usuario
User Manual
Publication date: January, 2005
Revision A1
Revision A1
66
In L4 QoS Configuration, you can enter one of these special network
transmission events, for example we use” Down prioritize web browsing, e-
mail, FTP and news “L4 QoS Configuration and click apply, and then click
Custom L4. We can find Special TCP/UDP port
80,280,443,25,110,20,21,69,119,2009 have already existed and defined for
your using but it is fine that you modify this pre-defined TCP/UDP port with
other port number you prefer. In ” Down prioritize web browsing, e-mail, FTP
and news “ L4 QoS Configuration with default setting, special defined
TCP/UDP port possesses lower QoS traffic than Default class ( all other
TCP/UDP ports such as port 81,82,83,84,85 etc.). Giving an example, when
we transmit TCP packets with port number 80 at each of port 2 and port
number 81 at port 3 to port 1 until the congestion happens. The packets from
port 3 will be dropped by port 1 because the TCP packets have port number
80 is high priority and will have higher precedence to be sent out from port 1.
transmission events, for example we use” Down prioritize web browsing, e-
mail, FTP and news “L4 QoS Configuration and click apply, and then click
Custom L4. We can find Special TCP/UDP port
80,280,443,25,110,20,21,69,119,2009 have already existed and defined for
your using but it is fine that you modify this pre-defined TCP/UDP port with
other port number you prefer. In ” Down prioritize web browsing, e-mail, FTP
and news “ L4 QoS Configuration with default setting, special defined
TCP/UDP port possesses lower QoS traffic than Default class ( all other
TCP/UDP ports such as port 81,82,83,84,85 etc.). Giving an example, when
we transmit TCP packets with port number 80 at each of port 2 and port
number 81 at port 3 to port 1 until the congestion happens. The packets from
port 3 will be dropped by port 1 because the TCP packets have port number
80 is high priority and will have higher precedence to be sent out from port 1.
Fig. 4-14
Parameter description:
Quality of Service (QoS) Vlan Tag Configuration:
Used for setting up the QoS belongs to Vlan operation.
Port:
User can set up the port (1~24) respectively to let Vlan Tag QoS function
work on them. If you would like to set up all ports at a time, user is also
allowed to choose “All” in the selection list to simplify the procedure of
configuration.
work on them. If you would like to set up all ports at a time, user is also
allowed to choose “All” in the selection list to simplify the procedure of
configuration.