Sony kdl-20s3000 Guía Del Usuario

 GB

Switch on the connected equipment, then 
perform one of the following operation.

For equipment connected to the scart sockets using a 
fully-wired 21-pin scart lead 
Start playback on the connected equipment.
The picture from the connected equipment appears on 
the screen.

For an auto-tuned VCR (page 6)
In analogue mode, press PROG +/-, or the number 
buttons, to select the video channel. 

For other connected equipment 
Press 

/

 to display the connected equipment list. 

Press 

F

/

f

 to select the desired input source, then press 

. (The highlighted item is selected if 2 seconds pass 

without any operation after pressing 

F

/

f

.) 

When the input source is set to “Skip” in the “AV 
Preset” menu under the “Set-up” menu (page 27), that 
input does not appear in the list. 

AV1/

 AV1 To see the equipment connected 

to A.

AV2/

 AV2 To see the equipment connected 

to B.

~

SmartLink is a direct link between the 
TV and a VCR/DVD recorder.

 AV3

To see the equipment connected to 
C.

 AV4

HDMI IN 4*.
To see the equipment connected 
to D.
If the equipment has a DVI socket, 
connect the DVI socket to the HDMI 
IN socket through a DVI-HDMI 
adaptor interface (not supplied), and 
connect the equipment’s audio out 
sockets to the audio in HDMI IN 
sockets.

*  

~

• Be sure to use only an HDMI cable that bears the HDMI 

logo.

• When HDMI control compatible equipment is connected, 

communication with the connected equipment is 
supported. Refer to page 18 to set up this communication.

 AV5 or 

 

AV5

To see the equipment connected 
to G.

z

To avoid picture noise, do not connect 
the camcorder to the video socket 

5 and the S video socket 

5 

at the same time. If you connect mono 
equipment, connect to the L socket 

5.

PC 

To see the equipment connected 
to F.
z

It is recommended to use a PC 
cable with ferrites.

Headphones H Connect to the i socket to listen to 

sound from the TV on headphones.

Conditional 
Access Module 
(CAM) I

To use Pay Per View services.
For details, refer to the instruction 
manual supplied with your CAM. To 
use the CAM, remove the rubber cover 
from the CAM slot. Switch off the TV 
when inserting your CAM into the 
CAM slot. When you do not use the 
CAM, we recommend that you replace 
the cover on the CAM slot.

~

CAM is not supported in all countries. 
Please check with your authorized dealer.

Hi-Fi audio 
equipment E

Connect to the audio output sockets 

 to listen to the sound from the TV 

on Hi-Fi audio equipment.

Return to normal TV 
mode

Press DIGITAL or ANALOG. 

Access the Digital 
Favourites (in digital 
mode only)

Press . 
For details, see page 15.

Change the volume of 
the connected HDMI 
control compatible 
audio system

Press 2 +/-.

Mute the sound of the 
connected HDMI 
control compatible 
audio system

Press %.
Press again to restore.

010COV.book  Page 17  Thursday, September 13, 2007  9:54 AM