Avaya a500 Guía Del Usuario
show Commands
Cajun A500 ATM Switch User Guide
10-83
show system interfaces
Purpose
The
show system interfaces
command displays the operational status, admin status,
current state, and type of media for each interface in the Cajun A500.
Syntax
show system interfaces
Arguments
This command requires no additional arguments.
Example
A500: show system interfaces
Device Oper Admin State Type
Status Status
_________________________________________________________________
Self up up present PROPVIRTUAL
Self up up present SAR
Output Description
The following table describes the output fields:
Field
Description
Values
Device
Type of board and port number.
A1.1 to A4.8, E1, and Self
Oper Status
The operational status of the interface,
based on the admin state or fault.
Up, down
Admin Status
The management state of the interface.
Up, down
State
The state of the interface, based on if a
module is present or not.
Present, invalid
Type
The type of media of the interface.
STS_#c (MultiMode)
OC3
The transmission system selected.
STS_3c for SONET or
STM_1 for SDH
OC12
The transmission system selected.
STS_12c for SONET or
STM_4