Avaya bis 10 Guía De Referencia
OFTEN USED FEATURES
Callback
Account Code Entry
To program:
Use Callback to be notified when a
busy extension or outside line is
busy extension or outside line is
free. Callback works only for busy
extensions on ICOM button phones;
extensions on ICOM button phones;
use Line Request for busy outside
lines. On SA button phones,
lines. On SA button phones,
Callback works with busy inside
extensions; it works with busy
outside lines only on SA or
extensions; it works with busy
outside lines only on SA or
Pool
buttons. Selective callback which
activates feature on call-by-call
basis is available on Feature
screen, from a feature code, or from
a programmed button. You must
a programmed button. You must
program your phone for automatic
callback which activates feature for
every call.
every call.
To turn automatic callback on/off:
Press Feature and dial 00.
1.
2.
3.
4.
Label a button.
Slide T/P to P.
1.
Press any ICOM or SA button
Dial
✱
12 to turn on or
✱✱
12
to turn off.
2.
3.
Press labeled button.
Dial
✱
82.
Press Feature and dial
✱
00.
Press Feature and dial
✱
00.
4.
5.
To use automatic callback:
To
1.
enter an account before calling:
1. When you hear five short
beeps after you reach a busy
extension or outside line,
hang up.
extension or outside line,
hang up.
Press programmed Account
Code button, or press Feature
and dial 82.
and dial 82.
2.
3.
4.
Dial account code, followed by #.
2. Lift handset after one long ring
and three short rings.
Press outside line or SA button.
To program a selective callback
3. For inside calls, extension or
button:
number is automatically dialed.
Lift handset or press Speaker-
phone.
phone.
5.
Dial number (including dial-out
1. Label a button.
To cancel a queued callback
code if using SA button).
2. Press Feature and dial 00.
request:
3. Press labeled button.
1. Press the button the call is on.
Repeat Steps 1 and 2 to change an
account code during a call. Caller
does not hear you enter the account
code. Account code cannot be
changed if it was entered for the call
account code during a call. Caller
does not hear you enter the account
code. Account code cannot be
changed if it was entered for the call
before the call arrived.
4. Dial
✱
55.
2. Lift handset.
5. Press Feature and dial
✱
00.
3. Press Drop.
4. Press the button the call is on.
To use selective callback for busy
extension:
Hold
When you hear fast busy
signal press programmed
button or press Feature and
dial 55.
button or press Feature and
dial 55.
Hang up after five short beeps.
Lift handset after one long ring,
and three short rings.
and three short rings.
1.
Press the Hold button to put a call
or conference on hold. As a
reminder, your phone beeps every
60 seconds.
or conference on hold. As a
reminder, your phone beeps every
60 seconds.
2.
3.
When the hold timer expires, a Call
on Hold message is displayed on
display phones.
display phones.
To use selective callback for busy
outside lines:
When you hear fast busy
signal, press Feature and dial 55,
or press programmed button
you get dial tone. Finish dialing
signal, press Feature and dial 55,
or press programmed button
you get dial tone. Finish dialing
if necessary.
Hang up after five short beeps.
Lift handset after one long ring,
and three short rings.
and three short rings.
1.
2.
3.